Prewash cycle, Manual clean lint filter – Whirlpool LPR4231A User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

other Operating Instructions
Continued

Agitator

barrel

For best results, use warm water for
prewashing stained laundry. Hot water
can set stains.

1. Use recommended amount of pre

soak product or detergent.

2. Push Cycle Control Knob in.
3. Turn clockwise to point to a number

next to PREWASH.

4. Pull the Cycle Control Knob out.

The washer will start.

5. When the cycle is over, add

detergent for the next selected
wash cycle. The Prewash cycle
should be followed by a wash cycle.

NOTE:

See the Laundry Guide for

additional prewashing or soaking tips.

Manual clean lint filter

Clean the filter at the bottom of the
agitator after every load for the best
filtering results.

To clean:

1. Lift off the agitator barrel.
2. Wash or wipe the filter clean in the

bottom of the agitator barrel. The
filter is not removable.

3. Replace the agitator barrel and

snap it into place.

Prewash cycle

Model LPR6244A

Manual clean

lint filter

This manual is related to the following products: