Stopping/restarting your washer – Whirlpool LBR6133DQ0 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O P E R A T I N G Y O U R W A S H E R
4. Select a wash-rinse temperature with
the Water Temperature Selector. Match
the water temperatures with the type
of fabric and soils being washed.
• See page 15 for water temperature
guidelines.
• Depending on your model, your
washer’s Water Temperature Selector
has either three or four settings (see
illustrations).
• The top temperature is the wash water
and the bottom temperature is the
rinse water.
5. Push in Cycle Control Knob and turn it
clockwise to the wash cycle you want.
See pages 7 and 8.
6. Pull out Cycle Control Knob to start
washer.
7. (OPTIONAL STEP) If desired, add mea
sured liquid chlorine bleach after the
washer starts agitating. See page 10.
8. (OPTIONAL STEP) If desired, add mea
sured and diluted liquid fabric softener
to the final rinse cycle. See page 10.
Stopping/restarting your washer
• To stop the washer at any time, push in
the Cycle Control Knob.
• To restart the washer, close the lid (if
necessary) and pull out the Cycle Control
Knob.