Select a cycle, Temperature selector, Push the start button – Whirlpool 3LE5710XM User Manual
Page 5: To stop and restart the dryer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
9 CYCLE 3TEMP
Heavy Duly
PermanenI Praia
COOL DOWN Cara
mill eaMM
Null
pvrmt
air V ■ /prati
/ heavy
1. Select a CYCLE
Set
2
.
TEMPERATURE SELECTOR
Turn the Control Knob either way to
point to the cycle and setting you
want. See page 6 tor information on
the cycles.
3
.
Push the START Button
Turn the Temperature Selector to the
needed drying temperature.
To stop and restart
the dryer
1
%
III
The dryer wiil start tumbling when you
To stop
the dryer, open the door (or
push the START Button.
turn the Control Knob to OFF).
.
To restart
the dryer, close the door.
Changing a setting
select cycle, it necessary, and push
The setting can be changed at any START,
time by turning the Control Knob to a
new setting.
The Cycle Control knob should point to OFF when the dryer is not in use.
It the dryer is stopped before the cycle is finished, turn the Cycle Control
Knob to OFF.
5