Using your refrigerator, Setting the control, Adjusting the shelves – Whirlpool ET14DC User Manual
Page 5: Power saving control, Removing crisper and crisper cover, Removing crispers
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using your refrigerator
Setting the control...
The Temperature Control is on a console In
side the refrigerator in the top right corner It oontrols
the temperature in both the refrigerator and freezer.
To start the refrigerator, set the control to Number 3.
Adjusting the shelves...
This setting should be about right tor nor
mal household refrigerator usage.
Give the refrigerator time to cool down com
pletely before adding food. (This may take several
hours].
The control will be set about right when milk or
luice is as cold as you like
Power Saving Control...
The Power Saving Control operates electric heat
ers around door openings. These heaters help keep
moisture from forming on the outside of the
refrigerator.
Use the "OFF" setting
when humidity is low.
Use the "ON" setting if
moisfure forms on the
outside of the refrig
erator.
R E DU C E S E XT E RI O R
M O IST U RE
SA V ES P O WE R
Guide Stop
Shelf Stop
Shelf Guide
1 First, remove food from shelf
2 Slide shelf straight ouMo stop
3, Lift front.
4 Slide the rest of the wav out
Repiacing Sheif;
1, Fit notches on back of cover into back supports
on wall of refrigerator,
2. Lower front into place
Removing crisper and crisper
cover...
Lift the Front, Then the Bock
Removing Crispers:
1 Slide crisper straight out to stop
2. Lift the front
3. Slide the rest of the way out,
4. Replace m reverse order
Removing Cover:
• Lift front, then lift back
• Pull up and out
Repiacing Cover:
1 Fit notches on back of cover into back supporfs
on wall of refrigerator,
2 Lower front into place.