Whirlpool AD0402XS0 - Manual (Page 3)

Before using your dehumidifier
It is your personal responsibility and obligation to make sure your dehumidifier:
Has been properly installed on a floorthat is rea­
sonably level.
is the right size for the area you want to
dehunnidify.
is oonnected to the right kind of outlet, with the
proper electrical supply and grounding. (Refer
to “Electrical Requirements" on page 4.)
Is used only to do what home dehumidifiers are
designed to do.
• Is not used by anyone unable to operate it
properly.
• Is properly maintained.
• Is used in an area where the room temperature
will not fall below 65 F (18.3 C).[48,40 and 30 pint
models will operate in temperatures down to
50 F (10 C).]
• Do not remove Tech Sheet which is inside the
cabinet. Your service technician needs this
information.
Install Properly...
1. On most models, two rollers let you easily move
the dehumidifier. Remove the water pan. Tilt unit
forward and roll to another position.
If your model does not have rollers, pick up the
unit to move it to another position.
2. Allow at lease 12 inches (30.5 cm) of space
around the unit for good air circulation.
3. Keep all outside doors, windows and other
openings closed when dehumidifier is operat­
ing, Humid outdoor air will add to the de­
humidifier's operating load.
4. Water pan must be properly positioned on the
hangers inside the cabinet when dehumidifier
is operating.