To change refrigerator light, To remove ice, Ikwarning – Whirlpool 6ET18GK User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using Your Refrigerator
Continued

Changing the light bulbs

ikWARNING

Electrical Shock Hazard

Before removing a light bulb, either unplug

the refrigerator or disconnect the electricity

leading to the refrigerator at the main power

supply. Shock and injury can occur if elec
tricity remains connected.

To change refrigerator light:

1. Disconnect refrigerator from power supply.

2. Reach behind the Control Console to find

bulb(s).

3. Remove bulb.
4. Replace with a 40-watt appliance bulb.
5. Reconnect power supply.

NOTE: Not all commercial appliance bulbs will fit
your refrigerator. Be sure to replace bulb with one
of the same size and shape.

Reversing the door swing
You can change the hinges on your refrigerator so
the doors open the other way. Refer to the instruc
tions sheet included with your refrigerator.

Ice cube trays

If cubes are not used, they may shrink. The
moving cold air starts a slow evaporation. The
longer cubes are stored, the smaller they get.

To remove ice:

1. Hold tray at both ends.

2. Twist slightly.