Whirlpool LA6800XM - Manual (Page 4)

Starting your washer
Before starling your washer:
1. Measure and add detergent.
2. Place sorted load in washer.
3. Start washer.
wash
hot hot warm cotd
warm cold cold cold
energy saving
temperature selector
super capacitii
2 SPEED 5 CYCLE
Wagic Clean Filler
Permanent Press
COOL DOWN Cai
Select a
1. LOAD SIZE
Select WATER
2. TEMPERATLRES
• To change the setting on the LOAD
SIZE SELECTOR, turn the knob to RESET.
• Then turn the knob to point at a
setting that describes the size of the
load you want to wash.
• Set the knob on or be­
tween HAND WASHABLE (a few small
items) and EX LARGE (a full load).
See your "Laundry Guide" for details
on load sizes.
• Select wash and rinse water tem­
peratures by pushing a button.
• This drawing shows a warm wash
(top temperature) and cold rinse
(bottom temperature) selection.
Recommended wash temperatures
can be found in your "Laundry Guide”
and printed under the washer lid.
LOAD SIZES AND WATER LEVELS
Use less than a full tub of water
when you have less than a full load
to wash.
EX-LARGE (20.5 gals./77.6 L)*
MEDIUM (13.9 gals /52.6 L)*
HAND WASHABLE (7.8 gals./29.5 L)*
For best cleaning results, the
load must be able to move freely
in fhe water. Too big a load or too
little water can tear items.
’Approximate fill with load.