For a pre wash, For rinsing oniy, For spinning oniy – Whirlpool LA5530XK User Manual
Page 7: Liquid bieach dispenser
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

For a Pre Wash
Use thss settir e e s^ srter SOAK
SSYCLE ino r.r'sei
-jg" detergent
for a sirsgie oash Au oht-Ucsod
• Set the LOAD SIZE SELECTOR.
• Set wash vsater rer'^irseratoi*;;
• Push the Cycle Control Knob in and
turn it to the'S-nninu'e rnnirk ■ the SOAK
CYCLE
• Pull the Control Kriotj
лг x
start the
washer See SOAK CY''';..t description on
pages
• After filling, the washer may pause
before starting to agitate.
For Rinsing Oniy
Loads with towels, diapers, jeans
or heavily soiled items otten need extra
detergent. Extra detergent can require
an extra rinse
Your washer can be set to rinse
only Use the setting tor an extra rinse, or
for laundry that only needs a rinse and
spin
For Spinning Oniy
There mioy be times when you
want to dram out all the wash water and
start over. To stop the washer at any
t rne, just push in on the Cycle Control
Knob
There is a dot just after the num
bers in PERMANENT PRESS, REGULAR
EtEAVY and KNITS GENTLE It you push in
on the Cycle Control Knob, turn the
pointer to one of fhose dots and pull the
Control Knob out, the washer will fill,
agitate, drain and spin
If you want high agitation and
spin, use the dot in REGULAR HEAVY, If
you want low agitation and spin, use the
dot in KNITS GENTLE, Use the dot in PER
MANENT PRESS if you want high
agitation and a low-speed spin
To set the washer so it drams and
sruins water out of the load, pusn in on
the Control Knob, turn the dial to the
right I cLuckwisej so the pointer is rouch-
mg the bar just before GEE in any cycle
The washer will drain, spin out
w'Oter and stop. If you want a low-speed
SDiri, use the bar on PERMANENT PRESS
or KNITS GENTLE, All the other cycle
settings nave a high-speed spin
Liquid Bieach
Dispenser
The bleach dispenser is under the
id of the washer m the front corner. It
has the words, LIQUID BLEACH, on it
• Before starting the washer, but after
loading it, add the bleach
• Use a measuring cup with a pouring
spout to help avoid spilling or spattering
the bleach
• Follow the directions on the bottle for
the amount to use. Never use more
than 1 cup (250 mL) for a full load.
Use less with lower water level
settings.
Use a standard
measuring cup
with a pouring
spout to fill
dispensers.
• Do not let any bleach run down
into the washer basket. Concen
trated bleach will damage any
fabric.