Starting your washer, Select a 1. load size, Select water 2. temperatures – Whirlpool LA7700XP User Manual

Page 4: Load sizes and water levels

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Starting your washer

Before starting
your washer:

1 Measure and add detergent

2 Place sorted load in washer
3 Start washer

Select a

1. LOAD SIZE

Turn the knob to point at a setting

that describes the size of load you

want to wash.

' Set the knob on or between EX

SMALL (a few items) and LARGE
(a full load).

Select WATER

2. TEMPERATURES

• Select wash and rinse water tem

peratures by pushing a button,

• This drawing shows a warm wash

(top temperature) and cold rinse

(bottom temperature) selection.

Recommended

wash

temperatures

can be found in your "Laundry Guide.

NOTE: Use the LARGE water level

for best permanent press results.

IMPORTANT: Use warm water
with the PER’T PRESS or KNITS/

GENTLE cycles. For heavily

soiled permanent press or knit
clothes, pre-wash or pre-soak
before washing in warm water.

LOAD SIZES AND WATER LEVELS

For best cleaning results, the

load must be able to move freely

in the water Too big a load or too
little water can cause wear or

tearing of load items.

'Approximate
fill with load.

CAUTION:

DO NOT

OVERLOAD WASHER.

LARGE

(17.3 gals./65.5 L)*

(14.7 gals./55.7 L)‘

(12.1 gals./45.8 L)‘

EX SMALL (9.5 gals./36.0 L)*