Lighting standing oven pilot – Whirlpool SB100PER User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Lighting Standing Oven Pilot
Make sure the oven control is OFF.
3.
Hold a lit match over the oven
burner pilot located at the rear of
the burner.
2.
Open the lower oven door and
remove the broiler pan rack from
the broiler oven.
4.
After the oven burner pilot is burn
ing steady, check burner lighting
by turning the Oven Control to a
temperature above140°F (60°C).
The burner will take 50-60 seconds
to light.
5.
Replace the broiler drawer.
WARNING; Do not attempt to light the oven burner during a
power failure. Personal injury could result.
This manual is related to the following products: