Operating instructions, Starting your washer – Whirlpool 3LA5580XS User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

operating instructions
Starting Your Washer
Be sure to measure and add detergent, then place
a
sorted load in the washer before starting it.
WATER SAVING
LOAD SIZE SELECTOR
ENERGY SAVING
TEMPERATURE SELECTOR
1
.
Select a LOAD SIZE
Soloot
2
.
WATER TEMPERATURES
• Turn the knob to point at a setting
that describes the size of load you
want to wash,
• Set the knob anywhere on or be
tween EX SMALL (a few small items)
and EX LARGE (a full load).
NOTE; Use the EX LARGE water
level for best permanent press
results.
• Match the wash and rinse water
temperature to the type of fabrics and
soiis being washed.
• All rinses are cold. Cold rinses save
energy and help prevent wrinkles from
setting into fabrics.
Recommended wash temperatures
can be found in your "Laundry Guide.”
IMPORTANT: Use warm water
with the PERM’T PRESS or KNITS/
GENTLE cycles. For heavily
soiled permanent press or knit
clothes, pre-wash or pre-soak
before washing in warm water.
LOAD SIZES AND WATER LEVELS
For best cleaning resuits, the
load must be able to move freely
in the water. Too big a ioad or too
little water can cause wear or
tearing of load items.
‘Approximate ^
fill with load.
CAUTION:
DO NOT
OVERLOAD WASHER.
EX LARGE
EX SMALL
(21.7 gal./82.1 L)‘
(18.3 gal./69.3 L)‘
(15.0 gal./56.8 L)‘
(11.9 gal./45.0L)‘