Using the refrigerated shelves Page 8
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U S I N G Y O U R F R E E Z E R
Using the refrigerated shelves
Your freezer is equipped with refrigerated interior
shelves. Packages in direct contact with the
shelves will have the best refrigeration. Fresh,
unfrozen food packages should be stored directly
on the shelves and not on top of already frozen
food packages.
When placing the food packages in your
freezer, please remember
• The cabinet shelves have the best freezing
capability. The door shelves and the bottom of
the cabinet have a slightly higher temperature.
Therefore, packages sensitive to temperature
(meat, poultry, etc.) should not be placed on the
door shelves or the freezer bottom.
• Give the cold air a chance to completely
surround the packages.
Using the lower storage gate
To lower gate:
1. Lift top of gate up slightly to clear supports.
2. Pull gate forward.
To raise gerte:
1. Return gate to upright position.
2. Lift top of gate slightly to clear supports.
3. Lower gate into supports.
Pull top up,
then forward.
Removing the base grille
For Manual-defrost trxjdels: The base grille will
need to be removed when defrosting the freezer.
To remove the grille:
1. Open the door.
2. Pull on both sides of the grille.
To replace the grille:
1. Line up grille support tabs with openings in
freezer cabinet.
2. Push firmly to snap grille into place.
3. Close the door.