Selecting wash-rinse temperatures, Selecting a cycle and time – Whirlpool LMR5243A User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATING YOUR WASHER
Load size tips
• Items should move freely in the washer. Do
not overload the machine or select a load
size that is too small for the wash load.
• Use a large load size setting for best results
with permanent press clothes.
• Reduce wash time when using small load
size settings. Loads with only a few small
items need less wash time.
Selecting wash-rinse temperatures
Match the water temperature to the type of
fabric and soils being washed. The top
temperature is the wash water and the bottom
temperature is the rinse water.
Water temperature tips
• Use warm wash water with the Permanent
Press and Delicate cycles. For heavily soiled
permanent press items, use hot wash water.
• Always use cold rinse water for permanent
press fabrics.
• For heavily soiled permanent press or knit
clothes, pre-wash or pre-soak in warm water
before washing.
See the “Water usage guide" on page 16 for
more information.
Selecting a cycle and time
You will find information you need to help you
make correct cycle selections in this section.
• Pages 7-8: Use the information on these
pages to guide you when selecting a wash
cycle and time.
• Page 9: Use this page to help you under
stand what happens during a wash cycle.