Starting your washer, Select a 1. load size select water 2. temperatures, Load sizes and water levees – Whirlpool LA5700XP User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Starting your washer

Before starting your washer:

1 Measure and add detergent

2. Place sorted load in washer,
3 Start washer

Select a

1. LOAD SIZE

Select WATER

2. TEMPERATURES

• Turn the knob to point at a setting

that describes the size of load you

want to wash

• Set the knob on or between

EX SMALL (a few items) and
LARGE (a full load).

NOTE: Use the LARGE water level
tor best permanent press results.

• Mafch the wash and rinse water

temperatures to the type of fabrics
and soils being washed

• This drawing shows a warm wash

(top temperature) and cold rinse
(bottom temperature) selection

Recommended wash temperatures
can be found in your "Laundry Guide'.'

LOAD SIZES AND WATER LEVEES

For best cleaning results, the

load must be able to move freely
in the water. Too big a load or too
little water can cause wear or

tearing of load items.

"Approximate

fill with load

CAUTION:

DO NOT

OVERLOAD WASHER.

LARGE

(17.3 gals./65.5 L)*

(14.7 gals./55.7 L)*

(12.1 gals./45.8 L)*

EX SMALL (9,5gals,/36.0L)*