Whirlpool ED19TK - Manual (Page 4)

Using your refrigerator
Air Outlet Power-Saving Control Temperature Control - Set on 3
Setting the Controls...
Controls for adjusting temperatures are in both the
refrigerator and fhe freezer
To stari:
1 Set the TEMPt RATURE CONTROL (in the refrigera­
tor) to 3
2 Set the AIR CONTROL [in the freezer] to 3
Air Control - Set on 3
Give the refrigerator time to cool down com­
pletely before adding food, (This may take severa
hours). The control console has directions for odjust-
ng temperatures, if needed, Oontrols will be set
about right if your milk or juice is as cold as your
family likes if, and when ice cream is firm
Do not block the air outlets on e ther contro
panel That can slow the air movement needed to
keep temperatures at the level you set
The POWER SAVING CON­
TROL
on the control panel in the
refrigerator operates electric
heaters. These heaters help pre­
vent moisture from forming on
the outside of the refrigerator
when humidity is high
•
SAVES REDUCES
POWER EXTERIOR
,W(3ISTURI
Off Setting Helps
Save Energy
• Use the OFF setting when humidity is low
• Use ON it moisture forms oh the outside of the
refrigerator
The Meat Pan Air Controi...
Cold air flows against the
meat pan through an opening
between the freezer and the
refrigerator This helps keep the
meat pan colder than the rest
of the refrigerator.
Set the control to let more or
less cold air through.
Colder Meat Storage
Use Control to Adjust
Meat Pan Temperatures
Adjusting Shelves...
Shelves can be adjusted to match the way you use
I f y o u r m o d e l h a s g l a s s s h e l v e s , b e c a r e f u l T h e y a r e
h e a v y
To remove shelves:
1 Tilt up at front
2 Lift up at back
3 Pull shelf straight out
To repiace:
1 Guide the rear hooks into the slots in the shelf
supports
2 Tilt up front of shelf until hooks drop into slot. Lower
front of shelf to level position