Select cycle and wash time; 2. start the washer – Whirlpool LC4500XM User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

3 CYCLE 3TEMP

Pprmarwnt Pr«t»

COOL DOWN Car*

puah flop ^***s&>

Select CYCLE and WASH TIME;

2. Start the washer

Push in the Control Knob and turn

it to the right. It must be pushed in
and turned only clockwise.

start the washer by pulling out

the Control Knob. The washer wil

fiil to its highest level with wash
water of the selected tempera

ture. After filling, the washer will

agitate forthe selected number
of minutes.

Stop on a number in the cycle

you want. The humbers are

minutes of wash time. The

drawing shows 8 minutes of
agitation in the REGULAR HEAVY
Cycle.

To stop the washer at any time

push in the Control Knob. To

restart the washer, pull out the
Control Knob.

To set the controls for a rinse and
spin, a drain and spin,or a pre-wash,
see page 8.