Whirlpool 3401086 - Manual (Page 11)

O P E R A T I N G Y O U R D R Y E R
End-of-Cycle signal
(on some models)
The dryer sounds a signal to
let you know when the cycle is
finished. The signal is helpful
when you are drying perma­
nent press, synthetics, and
other items that should be removed from the
dryer as soon as it stops.
On some dryers, the end-of-cycle signal is
not adjustable.
' On other dryers, the end-of-cycle signal
can be turned On or Off by a selector. The
end-of-cycle On/Off selector is part of the
Start Button on some models, and part of
the FINISH GUARD* selector on other
models. The various types of selectors are
described in the chart below.
Using End-of-Cycle signal and
FINISH GUARD feature
(on some models)
If your dryer has the end-of-cycle signal
and/or FINISH GUARD feature, they may be
turned On or Off as shown below.
NOTE: Unless you turn off the FINISH
GUARD feature, it operates at the end of
the cycle.
Your model may have any of the following:
• Separate knob selectors for end-of-cycle
signal and FINISH GUARD feature.
• A combination knob for both features.
• CLEAN TOUC№" pushbutton pad for
both features.
SETTING SEPARATE
KNOBS
__ COMBINATION __ CLEAN TOUCH
O" KNOB SELECTOR
End-of-Cycle
Signal
OFF
Rnish Guard
OFF
I 0» *
□□□□
Finish Guard Cycle Signal
End-of-Cycle
Signal
OFF
Finish Guard
ON
□ □□□
Finish Guard Cycle Signal
End-of-Cycle
Signal
ON
Rnish Guard
OFF
□ □□□
Finish Guard Cycle Signal
End-of-Cycle
Signal
ON
Finish Guard
ON
on I
□□□□
Finish Guard Cycle Signal
11