E. install freezer, Parts and features, Model rv12efr – Whirlpool RV15EFR User Manual
Page 3: Model rv15efr
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
E. Install freezer
Level freezer so the door will stay open
at any position.
Parts And Features
Model RV12EFR
Model and
serial number
label
(on side wall)
Temperature
control
1. Locate, remove and discard the 4
bolts that held the freezer in the
shipping crate.
2. Locate the 2 front leveling legs
among the packing materials.
3. Screw these legs into the front
holes on the bottom of the freezer.
The back of the freezer rests on 2
fixed supports.
4. Adjust the 2 front legs so freezer
does not rock.
5. Connect freezer to proper electrical
supply and attach retaining clip.
(Refer to “D. Locate proper
electrical supply" on page 2.)
6. Slide freezer into place.
7. Place a level on top of the freezer -
first side to side then front to back.
Turn leg clockwise to raise a
corner. Turn leg counter-clockwise
to lower a corner.
8. Repeat step 7 until the freezer is
level.
9. After freezer is fully loaded,
recheck with level.
Refrigerated
stationary
shelves
Lower
storage
gate
Base grille
Leveling
legs
Stationary
door
shelves
(not shown)
Model RV15EFR
Model and
serial number
label
(on side wall)
Temperature
control
Stationary
door
shelves
Key eject
lock
Refrigerated
stationary
shelves
Lower
storage
gate
Base grille
Leveling
legs —
(not shown)
Page 3