Adjusting the oven temperature control – Whirlpool FES364B User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

U S I N G Y O U R R A N G E

Adjusting the oven temperature control

Although your new oven is properly adjusted

to provide accurate temperatures, it may cook

faster or slower than your old oven.

If, after using the oven for a period of time,

you are not satisfied with the baking/roasting

results, you can change the temperature

calibration by following these steps:

1. Make sure

the Oven Temperature Con

trol Knob is turned to the off position.

Pull

knob straight off and

flip

it over.

2. Loosen

the locking screws inside the

control knob.

Note the position of the

notches.

3. To lower the temperature, hold

knob

handle firmly and

move

the tooth a notch

counterclockwise.

Each notch equals

about 5°F (2.5°C).

4. To raise the temperature, hold

knob

handle firmly and

move

the tooth a notch

clockwise.

Each notch equals about 5°F

(2.5°C).

Tighten

the locking screws and

replace

the control knob.

Locking
screw!

To raise

Notches