Whirlpool Cooktop - Manual (Page 4)

Now start...
With cooktop in kitchen.
ACAUTION
Property Damage
Lift entire cooktop up from cutout
when repositioning cooktop in
countertop opening.
Failure to do so could scratch
countertop.
1 .
Insert the cooktop into the
countertop cutout. Center the
cooktop in the cutout. Check that
the front of the cooktop is parallel to
the front edge of the countertop.
Check that all required clearances
are met. If cooktop is not properly
positioned, lift the entire cooktop
out of opening to make adjustments.
4.
Make the electrical connection.
(See Electrical requirements
and Electricai connection sections.
Panel B, for detnik 'i
Turn on the power supply.
AWARNING
Personal Injury Hazard
Do Not touch cooktop heating
elements: they may be hot.
Touching a heated cooking
surface could result in a serious
burn.
6
.
Push in and turn each control knob
to the "Hr position. Check the
operation of the cooktop heating
elements and indicator lights.
Insert one clamp tab through each
slot located on sides of the
burner box.
ACAUTION
Product Damage
Do Not overtighten screws.
Overtightening screws could
damage cooktop surface.
3
.
You have just
finished installing your
new Whirlpool cooktop. To
get the most efficient use from
your new cooktop, read your
Whirlpool Use & Care Guide.
Congratulations!
Keep Installation Instructions and
Guide close to cooktop for easy
reference. The instructions will
^make reinstalling your Whirlpool^
cooktop in another home '
as easy as the first
installation.
Secure cooktop to countertop by
hand-tightening each screw; then
use a screwdriver to tighten each
screw 1 to 1-1/2 more turns. Do Not
overtighten screws.
correspond
to steps.
Panel C