If the dishwasher is not operating properly, If you need assistance – Whirlpool 3374369 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If the dishwasher
is not operating
properly...
Check these points:
• is the door closed tightly and latched
securely?
• Has the cycle been set correctly to
start the dishwasher?
• Is the water turned on?
• Has a house fuse blown or circuit
breaker tripped?
• Has eiectricai power been
interrupted?
Note: if the motor has stopped because
of overload, it will automatically reset
itself within a few minutes, if after
checking these points the dishwasher stili
does not run or complete a cycle, call
for service.
If you need
assistance...
Check your Use and Care Guide for a
toii-free number to caii, or caii the
deaier from whom you purchased this
appliance. When you caii, you wiii need
the dishwasher model number and serial
number. Both numbers are located on
the serial/rating plate located behind
the door on the front frame of the
dishwasher opening.
Part No. 3374369
©1993 Whirlpool Corporation
Benton Harbor, Michigan 49022
Printed in U.S.A.