Regular and delicate cycles, What happens in each cycle, Permanent press cycle – Whirlpool LSS7233AN0 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O P E R A T I N G Y O U R W A S H E R
What happens in each cycle
Permanent Press cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills to the
selected load size with the selected water
temperature before agitation and timing start.
The washer will begin agitating immediately
after filling: agitation can occur with the washer
lid up or down. After agitation starts, the knob
turns clockwise until it points to OFF and the
cycle ends.
The washer pauses briefly throughout
each cycle.
These pauses are normal for
washer operation.
NOTE:
A Gentle Wash system helps protect
your fabrics by reducing wash agitation speed
during the last few minutes of wash agitation in
the Regular and Permanent Press cycles.
Regular and Delicate cycles
Fill to selected load size
JSL.
M
Wash selected time
Drain-No agitation
Spin
....
Fill
M
Rinse
Drain-No agitation
Spin-Spray rinse
Spin
A
Off
Fill to selected load size
№
Wash selected time
Partial drain-No agitation
h.......
Fill to selected load size
m
Brief agitation
Drain-No agitation
Spin
1^.....
Fill
\%
Rinse
Drain-No agitation
Spin-Spray rinse
Spin
A
Off
10