Starting your washer, Select cycle and wash time; start the washer – Whirlpool LA3800XS User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Starting your washer

Before starting
your washer:

1. Measure and add detergent.

2. Place sorted load in washer.
3. Start the washer.

Select CYCLE and WASH TIME;

Start the washer

Fill Area

Push In the Control Knob and

turn It to the right. It must be

pushed in and turned only
clockwise.

Stop on a number in the cycle you

want. The numbers are the minutes
of wash time. The drawing shows
6 minutes of agitation in the REG

ULAR NORMAL Cycle. NOTE: The
washer will fill only when the knob
points to a FILL area.

Start the washer by pulling out

the Control Knob. After filling, the
washer will agitate for the
selected number of minutes.

To stop the washer at any time,

push In the Control Knob. To
restart the washer, pull out the
Control Knob.