Water levels and load sizes, Liquid bieach dispenser – Whirlpool 2LA5700XK User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

AVhirlpool
Water Levels and
Load Sizes
The LOAD SIZE SELECTOR lets you
control the amount of water that fills
fhe washer. The wafer level can be set
for extra small, medium or full loads.
WATER LEVELS
Setting
Gallons/Liters
EX SMALL
9 9 37.5
MEDIUM
13.5 51.1
LARGE
16,9 64.0
■ Approximate fill with load
To save water and energy,
match the water level to the load
size.
For the best cleaning results, the
load should move freely in the water.
Watch for rollover; an item (like
a
sock]
should sink in the middle and come
up later on the outside.
Be sure to read pages 11 -13 in
your foundry
Guide.
You will find more
information on loading and load sizes.
IMPORTANT:
• The EX SMALL setting is
designed for very small loads. It
uses very little water. Too big a
load in this amount of water may
tear some items.
• Water may splash if you use EX
SMALL with the REG/HEAVY Cycle.
If this happens, move the LOAD
SIZE SELECTOR to MEDIUM.
Liquid Bieach
Dispenser
The bleach dispenser is under the
lid of the washer in the front corner. It
has the words, LIQUID BLEACH, on it. The
dispenser will hold enough liquid
bleach for one wash load.
• Before starting the washer, but after
loading it, add the bleach.
• Use a measuring cup with a pouring
spout to help avoid spilling or spattering
the bleach
• Follow the directions on the bottle for
the amount to use. Never use more
than 1 cup (250 mL) for a full load.
Use less with lower water level
settings.
Use a standard
measuring cup
with a pouring
spout to fill
dispensers.
• Do not let any bleach run down
into the washer basket. Concen
trated bleach can damage any
fabric.