Starting your washer, Select a 1. load size select water 2. temperatures, Load sizes and water levels – Whirlpool LA7680XP User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Starting your washer

Before starting

your washer:

1. Measure and add detergent

2. Place sorted load in washer.
3. Start washer.

Select a

1. LOAD SIZE

Select WATER

2. TEMPERATURES

■

To change the setting on the LOAD

SIZE SELECTOR, turn the knob to RESET,

■

Then turn the knob to point at a

setting that describes the size ot the
load you want to wash,

' Set the knob anywhere on or be

tween HAND WASHABLE (a few small

items) and EX LARGE (a full load).

See your "Laundry Guide” for details

on load sizes.

• Select wash and rinse water tem

peratures by pushing a button.

• This drawing shows a warm wash

(top temperature) and cold rinse
(bottom temperature) selection.

Recommended

wash

temperatures

can be found in your "Laundry Guide”

LOAD SIZES AND WATER LEVELS

For best cleaning results, the

load must be able to move freely
in the water. Too big a load or too
little water can cause wear or

tearing of load items.

'Approximate

fill with load.

DO NOT

OVERLOAD WASHER.

EX-LARGE (20,5 gals./77.6 L)*

MEDIUM (13.9 gals./52.6 L)'

HAND WASHABLE (7.8 gals /29.5 L)*

This manual is related to the following products: