Starting your washer, Select cycle and wash time, Start the washer – Whirlpool LA34OOXP User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Starting your washer

Before starting
your washer:

1 Measure and add detergent

2. Place sorted load in washer
3. Start washer.

Select CYCLE and WASH TIME;

. Start the washer

Push in the Control Knob and turn

It to the right. It must be pushed in

and turned only clockwise.

Start the washer by pulling out
the Control Knob. After filling, the
washer will agitate for the seiected

number of minutes.

Stop on a number in the cycle you

want. The numbers are minutes of

wash time. The drawing shows 10
minutes of agitation in the REGULAR

HEAVY Cycle. NOTE: The washer will
fill only when the knob points to a
FILL area.

To stop the washer at any time

push in the Control Knob. To

restart the washer, pull out the
Control Knob.