Baking, Resetting the oven temperature control, Using your oven – Whirlpool RB220PXK User Manual
Page 4: Setting the controls
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using your oven
Automatic MEALTIMER’ Clock
Manual Oven Light Switch Oven Seiector
Oven Signal Light
Minute Timer
Start Time Knob Stop Time Knob
Adjustable Oven Temperature Control
SETTING THE CONTROLS
BAKING
1. Put oven racks where you want them.
(See page 5 for suggestions )
2. Set Oven Selector to BAKE.
3. Set Oven Temperature Control to the bak
ing temperature you want.
4. Let the oven preheat until the Signal Light
goes off.
5. Put food in the oven.
6
.
When done baking, turn both knobs to
OFF.
r
During baking, the elements will turn on
and off to help hold the oven temperature at
the setting. (The top element will never turn
red, but will be hot.) The Signal Light will turn
on and off with the elements.
RESETTING THE OVEN TEMPERATURE CONTROL
Does your new oven seem to be hotter or colder at the same settings than your
old oven? The temperature setting in your old oven may have changed gradually
overthe years. The accurate setting ot your new oven can seem different
If you think the oven temperature needs adjusting, follow these steps:
OFF
Tooth
Notches
1. Pull out the center
of the Oven Tem
perature Control.
Loosen the lock
ing screw.
3. To lower the tern
perature, move
black ring so tooth is
cioserto LO. Each
notch equais
about 10°F (5'C).
Tighten the locking screw. Replace the knob.
4.
To raise the tem
perature, move
biack ring so tooth
deserto Hi, Each
notch equais
abouttO F (5 0).
■Tmk