Whirlpool BYCCD3421W0 - Manual (Page 14)

L A U N D R Y T I P S
Flam«*
ratardant
finish««
Some items have been treated with a flame-retardant finish to improve
their resistance to burning. Such items are clearly labeled. To retain flame-
retardant qualities through continuous use and washing, clean and dry
according to the manufacturer’s instructions.
Napp«d n«ms
• Corduroy,
velveteen
Dry separately or with similar colors to avoid iint transfer. Follow care
label directions.
1. Dry according to manufacturer’s instructions.
2. Remove from dryer while there is still a trace of moisture.
3. Smooth, reshape and air dry before putting away.
Quiltod, down-
flll«d lt«ms
Follow care label Instructions.
1. Dry one at a time.
2. Remove from dryer and shake or fluff the Item during the drying cycle.
3. Smooth and reshape before putting away.
Snowsults,
Jack«ts
• Nylon,
polyester-base
Check label for fiber content, then follow care label directions.
Dry according to manufacturer’s instructions.
1. Dry garment for about 10 minutes. Remove and turn inside out. Dry for
10 more minutes.
2. Remove from dryer immediately and hang on a nonrusting hanger to
finish drying. This will help eliminate wrinldes.
Tlnt«d, dy«d or
noncolorfast
Itoms
Towols
Dry according to fabric, weight and care label Instructions. Wipe the dryer
drum carefully to remove any dye or lint that can be transferred to other
loads. See ‘Cleaning the dryer interior” on pages 9 and 10.
Select cycle according to fabric type. Some towels, particularly those
made of a blend of synthetic fibers and natural fibers (polyester and
cotton blends), may shed more lint than other towels causing your dryer's
lint screen to get full faster. Be sure to remove lint from the dryer lint
screen before and after drying new towels.
WashabI« knits Do not overdry knits. Overdrying can cause shrinking and static cling.
1. Select cycle according to fabric and construction.
2. Turn synthetics and blends inside out when drying to avoid pilling.
3. Remove cotton and rayon knits while still slightly damp. Stretch into
shape and lay flat to finish drying.
14