Stopping/restarting your washer, Stopping/restarting your dryer – Whirlpool 3396315 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATING YOUR WASHER
5. Select a wash-rinse temperature with
the Water Temperature Selector. Match
the water temperature with the type of
fabric and soils being washed. See
page 21 for water temperature guidelines.
• Four wash-rinse temperatures are
available: hot-cold, warm-warm,
warm-cold, and cold-cold.
6. Push in and turn the Cycle Control
Knob clockwise. Stop when the indica
tor on the outer ring points to the
number in the wash cycle you want.
• The numbers are minutes of wash time.
• The cycles are described on pages
10 and 11.
7. Pull out Cycle Control Knob to start
washer.
8. (OPTIONAL STEP) If desired, add
liquid chlorine bleach AFTER washer
starts agitating. See page 13.
g. (OPTiONAL STEP) If desired, add
measured and diluted fabric softener
to the final rinse cycle. See page 13.
Stopping/restarting your washer
If necessary, you can stop your washer
during a cycle to add more clothes.
• To stop the washer at any time, push
in the Cycle Control Knob.
• To restart the washer, close the lid
(if necessary) and pull out the Cycle
Control Knob.