Operating instnictions, Starting your washer – Whirlpool LA9320XY User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Operating Instnictions
Starting your washer
Be sure to measure and add detergent, then place a sorted load in the washer
before starting it.
1. Select a load alza
• Position the Load Size Selector at the
setting that describes the size of load
you want to wash.
• The selector can be set anywhere on
or between EX SMALL (a few small
items) and EX LARGE (a full bad).
• To change the water level after the
washer has started to fill, slide the
selector to RESET, then to the
desired water level.
NOTE: For best washing resuKs, items
should move freely in the washer. Do
not overload the washer or choose a
water level that is too bw for your wash
bad.
For best results wKh permanent
press cbthes, use the EX LARGE
water bvel.
Reduce wash time when using EX
SMALL water bvel setting. Loads with
only a few small items need less wash
time for best results.
•
2. Sebct water temperature
• Match the water temperature to the
type of fabrb and soib being washed.
• The top temperature is the wash
selectbn and the bottom temperature
is the rinse selectbn.
• An indicator shows whbh temperature
has been selected.
NOTE: Use warm wash water with the
PERMANENT PRESS or KNITS
GENTLE cycles.
For heavily soiled permanent press
or knit clothes, pre-wash or pre-soak
before washing in warm water.
ALWAYS use cob rinse water for
permanent press fabrics.