Starting your washer, Select a 1. load size, Select water – Whirlpool LA5600XP User Manual

Page 4: Temperate res, Load sizes and water levees

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Starting your washer

Before starling
your washer:

1 Measure and add detergent

2 Place sorted load in washer
3 Start washer

Select a

1. LOAD SIZE

• Turn the knob to point at a setting

thatdescribesthesizeotload you

want to wash.

• Set the knob on or between EX

SMALL (a few items) and LARGE
(a full load).

NOTE: Use the LARGE water level
for best permanent press results.

Select WATER

TEMPERATE RES

• Match the wash and rinse water

temperatures to the type of fabrics
and soils being v^ashed

• This drawing shows a warm wash

(top temperature) and coid rinse
(bottom temperature) selection

Recommended wash temperatures
can be found in your "Laundry Guide"

LOAD SIZES AND WATER LEVEES

For best cleaning results, the

load must be able to move freely
in the water Too big a load or too
little water can cause wear or
tearing of load items

'Approximate
fill with load.

CAUTION:

DO NOT

OVERLOAD WASHER.

LARGE

(17.3gals./65.5L)*

(14.7 gals./55.7 L)*

(12.1 gals./45.8 L)*

EX SMALL (9.5 gals./36.0 L)'