Cleaning your freezer, Locating the proper electrical supply, Installing your freezer – Whirlpool 2165306 User Manual
Page 5: Warning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Proper installation of any appliance is very important. This section will tell you everything you
need to know to install your freezer properly.
Installing Your Freezer
Cleaning your freezer
Clean your freezer thoroughly before using it.
1. Use a sponge, cloth, or paper towel and
mild detergent in warm water to clean
outside and inside of freezer, door liner,
and gasket.
2. Rinse and dry thoroughly.
Locating the proper electrical supply
^WARNING
M
Fire Hazard
Do not use an extension cord.
Doing so can resuit in death, fire, or
eiectricai shock.
Recommended Grounding Method
A 115 Volt, 60 Hz., AC only 15 or 20
ampere fused and properly grounded
electrical supply is required. It is recom
mended that a separate circuit serving only
this appliance be provided. Use a recep
tacle which cannot be turned off with a
switch or pull chain. Do not use an exten
sion cord.
Attach power cord lock, from literature
package inside the freezer, over power cord
plug. See Electrical Requirements and
Grounding Instructions Sheet in literature
package for complete details.
^WARNING
>8
Electrical Shock Hazard
Plug into a grounded three-prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these instructions
can cause death, fire, or electrical
shock.
3-prong
grounding
type wall receptacle
Power cord lock
Freezer
power plug
3-prong
grounding
plug