Warranties, Commercial dryer specifications, Gcgm2991tq – Whirlpool GCGM2991TQ User Manual
Page 2: General information, Electrical requirements, Motor, Heater type, Heater/burner rating, Operational amperage, Dimensions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

WARRANTIES
EXCLUSIVE 90 DAY FACTORY LABOR WARRANTY!!
WASHER WARRANTY
^-Vear^imited^parts^nly^
]
For important information regarding warranty inclusions, exclusions
and limitations, please call 1-800-NO-BELTS
COMMERCIAL DRYER SPECIFICATIONS
SINGLE DRYER SPECIFICATIONS
MODEL NUMBER
GCEM2990TQ
tt
GCGM2991TQ
t
GENERAL INFORMATION
Stainless Steel Look Push Button Console, white
enamel drum, powdered paint finish cabinet and top,
removable lint filter
Full Console On Premise Electric Dryer,
3 Cycles: Timed Dry, Automatic, No Heat
3 Temperatures: High, Medium and Low
Full Console On Premise Electric Dryer,
3 Cycles: Timed Dry, Automatic, No Heat
3 Temperatures: High, Medium and Low
ELECTRICAL REQUIREMENTS
3-Wire Nominal 240/208 Volt, 60 Hz, A.C.
Standard 30 Amp Breaker/Fuse Branch
Circuit per Dryer (Subject to Local Codes)
Nominal, 120 Volt, 60Hz A.C., Standard
15 Amp Breaker/Fuse Branch Circuit per
Dryer (Subject to Local Codes)
MOTOR
t/
3
HP Single Speed Motor with Built-In
Overload Protector, 5.9 Amps Max Rating
t/
3
HP Single SpeedMotor with Built-In
Overload Protector, 5.9 Amps Max Rating
HEATER TYPE
ELECTRIC
GAS*
HEATER/BURNER RATING
(Add 500 Watts Approx. for Motor on all Dryer Models)
Heater Rated at 5600 Watts
22,000 BTUh Natural Gas
OPERATIONAL AMPERAGE
(Does not Include Control or Gas Valve)
Motor—4.0 Amps No load
Heater 23.33 Amps at 240 Volt 27.33 Total
Motor — 4.0 Amps
No load
DIMENSIONS
See Illustration Below
42 7/8" H, 29" W, 27
3
/
4
" D
42 ^/8" H, 29" W, 27
3
/
4
" D
SHIPPING WEIGHT (EST.)
122 Lbs
124 Lbs
DRUM VOLUME
7.0 Cu. Ft.
7.0 Cu. Ft.
‘Burner orifices are available for manufactured, natural, mixed, and LP gas with varying BTU ratings. t LP conversion Kit: 49572. ttPower cords on electric mod
els sold separately. Energy information is available online at
Dimensions are for planning purposes only. For complete
information, see installation instructions packed with product.
Exhaust Information
All dryers require the equivalent of a 4-inch diameter
exhaust duct. Rigid metal duct is recommended. Failure to
properly exhaust the dryer will result in improper operation.
# of 90° turns
4" Hood
2
1
/
2
" Hood
Maximum Length of 4" diameter ^^gid metaL duct
0
64 Ft.
58 Ft.
1
54 Ft.
48 Ft.
2
44 Ft.
38 Ft.
3
35 Ft.
29 Ft.
4
27 Ft.
21 Ft.
Maximum Length of 4" diameter flexible metaL duct
0
36 Ft.
28 Ft.
1
31 Ft.
23 Ft.
2
27 Ft.
19 Ft.
3
25 Ft.
17 Ft.
4
23 Ft.
15 Ft.
7