Starting a wash cycle, Stopping the dishwasher – Whirlpool 960 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

STARTING YOUR DISHWASHER

Starting a wash cycle

1. Load the dishwasher. See pages 7-10.

. Spin the spray arms. They should

turn freely.

3. Add detergent. See page 11.

4. Add rinse agent, if needed. See page 12.

5. Close door firmly until it latches.

. Run hot water at the sink nearest the

dishwasher until water is hot.
Turn water off. See page 20.

7. Press a Cycle pad. If desired, press one

or more Option pads. (See
pages 13-15.) The dishwasher
starts filling once you press a
Cycle pad unless you select
the delay wash cycle. You

may press Option pads as the machine
is filling.

The pad indicator glows red when a cycle

or an option is selected.

Stopping the dishwasher

You can stop your dishwasher anytime
during a cycle. All you have to do is:

• Open the door slightly. Wait for any filling

or spraying action to stop before opening
the door all the way. Close door to con

tinue cycle.

• Press Cancel/Drain. Once pressed, a

2-minute drain starts. (See page 14.)