Using your freezer – Whirlpool EV130fxk User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using your freezer
Setting the Cold Control...
To start, turn control to the middle of the dial.
This setting will maintain zero zone temperatures
under normal operating conditions.
Adjusting Cold Control...
• Turn control to higher number for colder
temperatures.
• Turn to lower number for less cold temperatures.
Cooling Freezer First...
• Allow freezer to cool 6 to 8 hours before filling
with frozen food.
• Let it cool overnight before adding large
amounts of unfrozen food.
• Frost V, ill form on the shelves. It will form first and
be heavier on the top shelves.
Note: Wien freezer is first started the compressor
will run constantly until the cabinet is cooled. It
may tal< e up to 6 to 8 hours or longer, depending
on room temperature and the number of times
the free,:er door is opened.
Aftert le cabinet is cooled the compressor will
turn on and off as needed to keep freezer at
proper temperature.
The Power Saving Control...
operctes electric heaters. These heaters help
prevent moisture from forming on the outside of
the free,:er when humidity is high.
• Use th e OFF setting when humidity is low to save
electricity.
• Use CN only if moisture forms on outside of
freezer.
Bottom Trivet...
To remove:
• Lift up, then pull out.
To replace:
• Set in bottom of freezer.
• Push into place.
Lift up
Then out