Soak cycle, Pre-wash cycle – Whirlpool 3LA5800XK User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

pre-wash
SET LOAD SIZE
SET WATER TEMPERATURE
PUSH IN KNOB, TURN TO
CYCLE AND TIME
PULL OUT TO START
SOAK CYCLE
This cycle is not for washing, it soaks, agi
tates, spins out the water and stops (no
rinse). Use it for stained, yellowed, grey or
heavily soiled laundry with a detergent
or pre-soak product. Chlorine bleach,* if
wanted, should be added to the cycle you
use after the SOAK Cycle is over.
FILL
WASH
SOAK
To
2 Minutes
6 Minutes
Selected
m
Low
No
Level
w
Agitation
▼
Agitation
urr pre-wash
• SET LOAD SIZE
• SET WATER TEMPERATURE
• PUSH IN KNOB, TURN TO
CYCLE AND TIME
• PULL OUT TO START
PRE-WASH CYCLE
Use tor heavily soiled items that may need
two washes. Use enough detergent for a
single wash. When the washer stops, add
more detergent and select a cycle*
WASH
6 Minutes
Low
Agitation
If You Need
Service or Help,
We suggest You
Follow These
Steps:
Before calling for service*...
Problems are sometimes caused
by little things you can correct without
tools. Check this list before you call for
service:
IF YOUR WASHER DOES NOT FILL:
• Is the power supply cord plugged in?
• Are both water faucets open?
• Is a fuse blown or circuit-breaker
tripped?
• Are the water supply hoses kinked?
• Is the Cycle Control Knob set and
pulled out?
10