Adjusting the door bins, Adjusting the door bin glides, Removing the tail-bottle retainer – Whirlpool ED22DC User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U S I N G Y O U R R E F R I G E R A T O R
Adjusting the door bins
To remove door bins:
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push down until it stops.
Adjusting the door bin glides
Use the bin glides to secure odd-shaped
Kerns or to separate other items.
1. Grasp glide.
2. Slide glide along bin.
Removing the tail-bottle retainer
The tail-bottle retainer fits onto any door bin
in your refrigerator. The retainer helps to
hold tail-bottles in place when opening and
closing the refrigerator door.
To remove tail-bottle retainer:
1. Grasp center of retainer.
2. Pull up and off of bin.
To replace tail-bottle retainer:
1. PosKion retainer above desired door bin.
2. Gently push retainer down onto bin.
3. Make sure both side notches sK firmly
against bin.
Notch