Installing a new bag – Whirlpool TU 4100 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing a new bag
Before installing a new bag, be sure;
1. The drawer side is securely locked.
2. The container is clean and free of sharp
debris that may have punctured the bag.
TU 8100 Model Series
rope handles behind the bag retainers as
shown.
Put unopened bag in drawer as shown.
Spread front bag corners and slide cuff
over right-front corner.
Spread rear bag corners and slide cuff
over left rear corner. Tuck cuffs behind bag
retainers as shown.
Press inside of bag against drawer
bottom, sides and corners for smooth fit.
TF 4600/TU 4100 Model Series
Put unopened bag in drawer as shown.
Spread front bag corners and slide cuff
over right-front corner.
Spread rear bag corners and slide cuff
over left-rear corner.
Press inside of bag against drawer
bottom, sides and corners for smooth fit.
DO NOT USE ANY KIND OF BAG
OTHER THAN THOSE DESIGNED
ESPECIALLY FOR USE IN YOUR
COMPACTOR.
Compactor bags may be purchased
from the dealer from whom you purchased
your appliance, your Inglis Factory Direct
Service Branch, or the nearest Inglis-
authorized service organization. Ask for
part no. 675186.