Whirlpool EB19ZK - Manual (Page 5)

Using your refrigerator
Power Saving Control
Temperature Control Air Outlet Air Control
Setting the controls...
Controls for the refrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in for
the first time,,.
1, Set the TEMPERA­
TURE CONTROL to3.
2. Set the AIR CON­
TROL to B.
Give the refrigerator time to cool down com­
pletely before adding food. (This may take sev­
eral hours.)
These settings should be about right for normal
household refrigerator usage.
The oontrols will be set about right when milk or
juice is as cold as you like and when ice cream
is firm.
Do not block the air outlet on the control panel.
Blocking it can slow the air movement needed to
keep temperatures at the level you set.
Changing the control settings...
If you need to adjust temperatures in the refriger­
ator or freezer, use the settings listed in the chart
below.
• Adjust the Temperature Control first.
• Wait at least 24 hours between adjustments.
• Then adjust the Air Control, if needed.
CONDITION:
If Refrigerator
Section is
TOO WARM _
If Freezer
Section is
TOO WARM
QUESTIONS? ___ _
If Refrigerator
COOL-LINE" Section is
service
jqo OOLD
REASONS: RECOMMENDED SETTINGS:
assistance
telephone
number
(page 15).
If ICE isn't
MADE FAST ENOUGH
If BOTH SECTIONS
are TOO WARM
Door opened often
Large amount of food added
Room femperature too warm
Temperature Control
Air Control 4
C
Door opened pften Temperature Control 4
Large amaunt of food added
Very cold room femperature
(can't cycle often enough) Air Control A
Controls not set correctly Temperature Control 2
for your conditions Air Control B
Heavy ice usage Temperature Control 3
Very cold room temperature
(can't cycle often enough)
Air Control A
Door opened often Temperature Control 4
Large amount of food added
Very warm or very cold
room temperatures Air Control B
--«tB-t-E-iWWRiewài.'. 11
Power Saving Control...
The Power Saving Control on the Control Con­
sole operates electric heater around the door open­
ings. These heaters help keep moisture from forming
on the outside of the refrigerator.
1. Use the "OFF" set­
ting when humidity
is low.
Use the "ON"setting
if moisture forms
on the outside of the
refrigerator.