Starting your washer – Whirlpool LA7899XP User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Starting your washer

Before starting

your washer;

1. Measure and add detergent.

2. Place sorted load in washer.
3. Start washer.

Select a

1. LOAD SIZE

Select WATER

2. TEMPERATURES

• Turn the knob to point at a setting

that describes the size of load you

want to wash.

• Set the knob anywhere on or be

tween HAND WASHABLE (a few small

items) and EX LARGE (a full load).

See your "Laundry Guide” for details

on load sizes.

NOTE: Use the EX LARGE water

level for best permanent press

results.

• Select wash and rinse water tem

peratures by pushing a button.

• This drawing shows a warm wash

(top temperature) and cold rinse

(bottom temperature) selection.

Recommended wash temperatures
can be found in your "Laundry Guide!’

IMPORTANT: Use warm water
with the PERM’T PRESS or KNITS/

GENTLE cycles. For heavily

soiled permanent press or knit
ciothes, pre-wash or pre-soak
before washing in warm water.

LOAD SIZES AND WATER LEVELS

For best cleaning results, the

load must be able to move freely
in the water. Too big a load or too

little water can cause wear or

tearing of load items.

’Approximate

fill with load.

CAUTION:

DO NOT

OVERLOAD WASHER.

EX LARGE (21.7 gals./82.1L)*
MEDIUM (16.4 gals./62.1L)*

HAND WASHABLES (11.9 gals./45.0L)*