Adjusting the door bins, Adjusting the biivshelf glides, Adjusting the bln/shelf glides – Whirlpool B2lDK User Manual
Page 9: Removing the tail-bottle retainer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U S I N G Y O U R R E F R I G E R A T O R
Adjusting the door bins
To rem ove door bins:
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push down until it stops.
Adjusting the biiVshelf glides
Use the bin/shelf glides to secure odd
shaped items or to separate other items.
1. Grasp glide.
2. Slide glide along bin/track.
NOTE: Shelf glides cannot be removed.
Removing the tail-bottle retainer
t
The tail-bottle retainer fits onto any door bin
in your refrigerator. The retainer helps hold
tall bottles in place when opening and
closing the refrigerator door.
To rem ove tail-bottle retainer:
1. Grasp center of retainer.
2. Pull up and off of bin.
To replace tail-bottle retainer:
1. Position retainer above desired door bin.
2. Gently push retainer down onto bin.
3. Make sure both side notches sit firmly
against bin.
Notch