Whirlpool RSZZBR - Manual (Page 7)

U S I N G Y O U R R E F R I G E R A T O R
Usng Your Refngerator
In This Section
Page Page
Setting the controls____________________ ___ 7 Using the ice cube trays __.11
Changing the control settings _ _ - .8 Using the automatic ice maker___________ __ 12
At^usting the door bins _ ____________ ___ _. .8 Removing the ice maker storage bin_______ __ 13
Adjusting the refrigerator shelves » - « .9 Using the Ice dispeitser________________ __ 14
Removing the crisper and crisper cover... ___ 9 Solving common Ice maker/
Removing the meat drawer and cover_______ .10 dispenser problems _ ....................... ........... __ 15
Adjusting the meat drawer temperature... __ 10 Removing the base grille_______________ __ 15
Removing the freezer shelves_____________ __ 10 Changing the light bulbs________________ __ 16
Removing the freezer trivet______ ________ ..„.11 Understanding the sounds you may hear _.17
Removing the freezer bin/basket ......... ............ __ 11 Saving energy_______________________ .....17
In order to obtain the best possible results from your refrigerator, it is important that you operate it
property. This section will tell you how to do just that.
Setting the controls
Controls for the refrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in for
the first time:
1. Set the Refrigerator Control to 3.
Refrigerator Control adjustments range from
1 (wannest) to 5 (coldest).
REFRIGERATOR
n
2. Set the Freezer Control to B.
Freezer Control adjustments range from
A (warmest) to C (coldest).
3. Give the refrigerator time to cool down com­
pletely before adding food. This may take
several hours.
The settings indicated above should be
correct for normal, household refrigerator
usage. The controls will be set correctly when
milk or juice is as cold as you like and when ice
cream is firm. If you need to adjust these
settings, see “Changing the control settings” on
page 8.
NOTE: The Automatic Exterior Moisture control
continuously guards against moisture build-up on
the outside of your refrigerator cabinet. This
control does not have to be set or adjusted.