To replace, Model rb220pxb, Removing the oven window – Whirlpool RB1005XY User Manual
Page 17: To remove the outer window, To replace the outer window
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

C A R I N G F O R Y O U R O V E N
To replace:
1. Fit
the door hinges into corner slots on the oven
frame.
2.
Push
the hinges straight in while lifting the door
slightly.
3. When hinges snap into piace, open
the door
and
rotate
the Broil Stop clips to uncover the
door hinge slots.
Close
the door.
Model RB220PXB:
To remove:
1. Open
the door to the first stop position.
2.
Hold
the door at both sides and
lift
it
at
the same angle it is in.
3. To repiace, fit
the bottom corners of the
door over the ends of the hinges.
Push
the door down evenly. The door will close
only when it is on the hinges correctly.
Removing the oven window
(model RB1005XY)
If your oven has an oven window instead of
the black glass door, the outer glass and
frame can be removed for cleaning. Do not
take apart a black glass door.
To remove the outer window:
1. Turn off
all controls. With the door
closed,
remove
the screws from the top
of the outer window frame.
2. Slightly tip
the window and frame out from
the top.
3. With both hands, iift up
on both sides of the
frame.
To replace the outer window:
1. Fit
the bottom tabs of the frame into the
bottom of the window opening.
2. Push
the top of the frame into place while
pushing down.
3. Replace
the screws.
17