Whirlpool ET22DK - Manual (Page 7)

Adjusting the crisper humidity control
You can control the amount of humidity in the
moisture-sealed crisper.
1. The control can be adjusted to any setting
between LOW and HIGH.
2. LOW (open) lets moist air out of crisper for best
storage of fruits and vegetables with skins.
3. HIGH (closed) keeps moist air in the crisper for
best storage of fresh leafy vegetables.
Moving the meat drawer and cover...
Adjusting the shelf glides...
The shelf glides can be used to secure odd
shaped items or to separate other items.
1. Grasp glide.
2. Slide glide along guide.
Shelf glide cannot be removed.
To remove the meat drawer:
1. Slide the meat drawer out to stop.
2. Lift the front.
3. Slide the drawer the rest of the way out.
4. Replace in reverse order.
To remove the cover:
1. Tilt front of cover up, lift at back, and pull
straight out.
2. Replace in reverse order.
SLIDE ALONG
GUIDE
Changing the light hulbs...
WARNING: Before removing a light bulb, either unplug the refrigerator or disconnect the
eiectricity leading to the refrigerator at the main power supply. Shock and injury can
occur if eiectricity remains connected.
To change refrigerator light:
1. Reach behind the control console to find bulbs.
2. Remove bulb.
3. Replace with a 40-watt appliance bulb.
To change freezer light (Model ET22DM only):
1. Squeeze top and bottom of light lens until lens
snaps free.
2. Remove bulb.
3. Replace with a 40-watt tubular appliance bulb.
4. Set bottom of lens in place. Press top of lens until
it snaps in place.