Starting your dryer, Select, Cycle and time – Whirlpool LT5008XM User Manual
Page 11: Push the, Start button, To stop and *5. restart the dryer, 4, changing a setting, Cycle and time push the 2. start button, Restart the dryer, Changing a setting
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting your dryer
Before starting your dryer, be sure laundry is sorted and loaded
properly (see your “Laundry Guide"). Be sure the door is tightly closed.
Select
1
.
CYCLE and TIME
Push the
2. START Button
Turn the Control Knob either way to The dryer will start fumbling when
point to the time setting you want in you push the START Button,
the cycle you want.
To stop and
*
5
.
restart the dryer
4
,
Changing a setting
The setting can be changed at any
time by turning the Control Knob to a
new setting.
To stop, open the door (or turn the
Control Knob to OFF).
To restart, close the door and push
the START button.
The Cycle Control Knob should point to OFF when the dryer is not in use.