To select 3, Wash water temperature, To select a – Whirlpool LA3300XP User Manual

Page 5: Water level

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

To select 3

WASH WATER TEMPERATURE

HOT WATER can be selected only

in the REGULAR HEAVY Cycle. Turn the

Control Knob to 12 or 14 minutes in the

REGULAR HEAVY Cycle.

All rinses use cold water. This saves
energy and helps prevent wrinkles

trom setting into tabrics.

WARM WATER can be selected by

turning the Control Knob to 8 orlO min

utes in the REGULAR HEAVY Cycle

• A warm wash is preset in the SHORT

Cycle. Just turn the Control Knob to

the 6 or 8 minute setting in that cycle.

To select a

WATER LEVEL

HIGH WATER LEVEL. The washer will

automatically fill to its highest level,
(about17.2 gals./65.1 L), when the

Control Knob points to a FILL area

LOWER WATER LEVELS. Setting the
washer to fill with less water also sets it

for a shorter wash time.

1. Push the Control Knob in and turn it

clockwise to a FILL area in the cycle
you want,

2. Pull the Control Knob out; the washer

will start to fill.

3. When the washer reaches the de

sired water level, push In the Control

Knob and slowly turn it past the FILL
area. Pull out the Control Knob to

start the washer.

For all rinses, the washer fills to Its

highest level with cold water.