Lint screen, Lint removal, Cleaning should be done only by a qualified person – Whirlpool 3LG57OlXP User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Lint screen

Clean the lint screen before each load. A screen blocked by lint can

increase drying time and may be a FIRE HAZARD.

Open the lid and pull the lint screen
straight out.

WARNING: DO NOT run the

1 PI dryer with the lint screen

loose, damaged or missing.

Doing so can cause over

heating, can damage fabrics and
can be a FIRE HAZARD.

with your fingers.

DO NOT rinse or wash the screen.

Push the screen firmly back into

place.

Lint removal

Lint can gather inside the dryer and create a fire hazard. This iinf

should be removed every 2 to 3 years, or more often, depending on

dryer usage.

Cleaning should be done only by a qualified person.

» Avoid electrical shock

hazard — unplug power
supply cord or turn off
electrical power.

• Avoid injury or damage - do not

put hands inside cabinet.

• Make sure dryer is cool.

1. Remove back panel (electric)

or lower access panel (gas).

2. Avoid damaging wires,

thermostats, funnel or igniter.

3. Remove lint from shaded area -

see art - with a soft brush or
vacuum cleaner

4. Replace panel; reconnect and

re-level dryer.