Dryer operating instructions, To stop and restart the dryer, Starting your dryer – Whirlpool LT5004XV User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Dryer Operating Instructions
The drawings in this book may vary slightly from your dryer model. They are
designed to show the different features of all the models covered by this book.
NOTE:
Your model may not Include all the features shown.
Starting your dryer
Before starting your dryer, be sure laundry is sorted and loaded properly. Make sure
the door is tightly closed.
1. Select a cycle and time
by turning
the Cycle Control Knob either way.
Stop when the indicator on the
knob's outer ring points to the cycle
and time setting you want.
FLUFF
20
AIR
AUTOUTC
PERMANENT
PRESS
2. Push the Start Button
to start the
set drying cycle and time settings.
3. To stop and restart the dryer:
• Open the door or turn the Cycle
Control Knob to an OFF area to stop
the dryer.
• Close the door and push the Start
Button to restart the dryer.
4. To change the setting
at any time,
turn the Cycle Control Knob either
way to point to a new time setting.
The Cycle Control Knob should point
to an OFF area when the dryer is not in
use. If the dryer Is stopped before the
cycle is finished, turn the Cycle Control
Knob to an OFF area.
13