Changing air direction, Ihtmi), Using the exhaust vent control – Whirlpool AC0052 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O P E R A T I N G Y O U R A I R C O N D I T I O N E R
Using the exhaust vent control
The Exhaust Vent Control draws stale or smoky
NOTE: For maximum performance, the Exhaust
Vent Control must be in the CLOSED position
when cooling or room air circulation is desired.
air from the room or circulates existing room air.
To exhaust room air:
1. Set Exhaust Control to OPEN.
2. Set Fan Control to desired setting. If no
EXHAUST VErfT
cooling is desired, set Fan Control to FAN
ONLY.
3. Set Thermostat Control to desired setting.
iHTMi)
)
OPEN
CLOSED
To circulate room air:
1. Set Exhaust Control to CLOSED.
2. Set Fan Control to desired setting. If no
cooling is desired, set Fan Control to FAN
ONLY.
EXHAUST VENT
mni
3. Set Thermostat Control to desired setting.
OPEN
CLOSED
Changing air direction
The louvers, in the top grille area of the air
conditioner, control the direction of the cooled air.
Move the tab, at the top left of the louvered area,
in the direction you want the air to go (right, left or
straight ahead).
Tab