Crestron electronic C2N-TFM - Manual (Page 43)

Crestron C2N-TFM FM Radio Tuner
Operations Guide - DOC. 6233A FM Radio Tuner: C2N-TFM • 39
File Transfer | Load Sub-Slot Device Command
3. As shown after this step, select the Net ID of the C2N-TFM (56), select
the desired sub-slot ID of the AM/WX Tuner (03), and then click OK.
The “Open” window appears (refer to the subsequent graphic).
“Select Network ID” Window
NOTE: When transferring any Cresnet file (touchpanel project/firmware), lower the
port speed baud rate to 38400 to match the Cresnet bus speed.
“Open” Window
4. Browse to the desired .upg file and click Open to begin the transfer.